Products

Analyser type:	Transistors, Diodes, LEDs, MOSFETs, JFETs.
Pinout detection:	Full pinout (only Gate on JFETs)
Pinout configuration:	Connect any way round.
Transistor measurements:	Vbe, hFE, Iceo
MOSFET measurements:	Vgs(on)
Diode measurements:	Vf
Probe type:	Universal grabber type.
Battery:	Single AAA cell (supplied).
Test conditions:	Typically 5mA, 5V peak.

Fully Featured Multimeters
Design for measuring AC/DC Volts, Current, Resistance, Frequency, Temperature, Continuity, Diode and Transistor.

Versatile, safe and Accurate
All of its inputs are protected to CE, IEN61010-1 CAT IV 600V safety rated and overload protection ensures uninterrupted operation and long life.Dual slope A/D conversion.

Large LCD with back-light
LCD display with back-light allows for easy reading even in dark area.

Extra functions
Continuity with beeper, Diode test, Data hold, Auto power off, Low battery indication, Overload indication, Back-light, Transistor Tester.

Analyser type:	Triacs and Thyristors (SCRs).
Pinout detection:	Automatic.
Triac/Thyristor detection:	Automatic.
Gate current range:	Auto: 100uA to 90mA
Load test current:	100mA (typ).
Battery type:	Single AAA (supplied).

Analyser type:	Zeners, LEDs, TVS etc.
Test currents:	2mA, 5mA, 10mA, 15mA
Voltage range:	0.00 to 50.00V
Slope resistance range:	0 to 8000 Ohms
Battery type:	Single AAA (supplied)
Test method:	Triple pulse burst @ 10pps (typ)
Test current duty cycle:	0.6%