This case is tough, very tough. With space for accessories
too, this case will protect your instrument wherever you go. It's
finished with high quality stitching and an embossed Peak logo. Complete
with removable fabric carry strap (150mm length).
External
dimensions are 150mm x 120mm x 40mm. We do not recommend that you fit
two instruments in this case (it's a bit tight and the 'on' buttons can
get pressed).
A pair of extremely sharp gold plated probes, primarily designed for the
Atlas ESR and Atlas ESR PLUS (models ESR60 and ESR70). These gold
needles feature our new standard 2mm sockets, allowing them to be fitted
to industry standard 2mm banana plugs. Even the 2mm sockets are gold
plated.
Each probe is 90mm long, is fully insulated except for
the 13mm sharp gold needle. These are VERY sharp and care must be used!
The needles can be bent with rough treatment.
Please note, your
ESR unit must be fitted with 2mm plugs to be used with these probes.
These probes are ONLY suitable for ESR units with firmware version 4.1
or later.
