Products

A pair of extremely sharp gold plated probes, primarily designed for the Atlas ESR and Atlas ESR PLUS (models ESR60 and ESR70). These gold needles feature our new standard 2mm sockets, allowing them to be fitted to industry standard 2mm banana plugs. Even the 2mm sockets are gold plated.

Each probe is 90mm long, is fully insulated except for the 13mm sharp gold needle. These are VERY sharp and care must be used! The needles can be bent with rough treatment.

Please note, your ESR unit must be fitted with 2mm plugs to be used with these probes. These probes are ONLY suitable for ESR units with firmware version 4.1 or later.

Analyser type:	ESR and Capacitance.
Component types:	Capacitors (>1uF).
ESR range:	0.00 Ohms to 40.0 Ohms.
ESR resolution:	From 0.01 Ohms.
In-circuit use:	ESR only.
Capacitance range:	1uF to 22000uF.
Battery type:	12V (GP23A/MN21).

Analyser type:	LCR
Component types:	Inductors, Capacitors, Resistors.
Inductance range:	1uH to 10H
Capacitance range:	0.5pF to 10000uF
Resistance range:	1R to 2MR
Typical accuracy:	±1.5%
Test frequency:	Auto: DC, 1kHz, 15kHz, 200kHz.
Min. inductance resolution:	0.8uH
Min. capacitance resolution:	0.5pF
Min. resistance resolution:	0.6R
Measurement scheme:	Snapshot

Analyser type:	LCR and component impedance.
Component types:	Auto/Manual for L,C & R
Measurement types:	Inductance, Capacitance and Resistance.
Other measurements:	Complex impedance/admittance.
More measurements:	Magnitude and Phase of impedance.
Inductance range:	0uH to 10H.
Capacitance range:	0pF to 10000uF.
Resistance range:	0R to 2MR.
Test frequency:	Auto and manual: DC, 1kHz, 15kHz, 200kHz.
Measurement scheme:	Continuous (with optional hold).

Suitable for:	LCR40 and LCR45.
Probe body length:	47mm (1.9")
Connector type:	2mm banana.

Fully Featured Multimeters
Design for measuring AC/DC Volts, Current, Resistance, Frequency, Temperature, Continuity, Diode and Transistor.

Versatile, safe and Accurate
All of its inputs are protected to CE, IEN61010-1 CAT IV 600V safety rated and overload protection ensures uninterrupted operation and long life.Dual slope A/D conversion.

Large LCD with back-light
LCD display with back-light allows for easy reading even in dark area.

Extra functions
Continuity with beeper, Diode test, Data hold, Auto power off, Low battery indication, Overload indication, Back-light, Transistor Tester.

Suitable for:	SOT23 (SOT-23) loose parts.
Pins:	3
Max. current:	100mA
Max. voltage:	50Vac, 75Vdc
SOT23 contact resistance:	<10mOhms
Temperature range (°C)	-34°C to 65°C
Temperature range (°F)	-29°F to 149°F